Looking for a Floor Sanding Company in Hanger Lane?

FlooringFirst is a flooring company providing professional floor sanding and restoration services in Hanger Lane, W5 and the surrounding areas.

Our floor sanding service in Hanger Lane is carried out by fully insured, experienced flooring technicians using dustless sanding equipment throughout — your home stays clean and protected from start to finish. Whether your floors are original pine floorboards, herringbone parquet, solid hardwood, or engineered timber, we restore them to their best condition using premium sealants from Bona, Loba, Junckers and Osmo.

The residential streets around Hanger Lane — from Greystoke Avenue and Pitshanger Lane through to the terraces closer to Western Avenue — are made up largely of 1930s and 1940s semi-detached properties. These homes were built with solid timber floors as standard, and even after eight or nine decades of daily use, those floors are almost always worth restoring. We've been working in W5 since 2004 and know exactly what to expect from the flooring in this part of West London. Get in touch with FlooringFirst and we'll give you an honest assessment of what your floor needs.

What services we offer in Hanger Lane, W5

• Floor sanding and sealing of solid hardwood and engineered wood floors
• Parquet floor sanding and restoration, including herringbone and basketweave patterns — with repairs and gap filling throughout
• Original floorboards sanding and repairs, with reclaimed seasoned pine boards matched to your existing floor
• Wood floor repairs — loose boards, water damage, cupping, missing sections and subfloor issues
• Staircase sanding and restoration to complement your refinished floors
• Wood floor staining — natural, grey, whitewashed and dark walnut finishes, with samples applied on your own floor before you decide
• Gap filling with resin and sanding dust colour-matched to your boards
• Floor soundproofing — particularly useful in Hanger Lane's semi-detached and terraced properties
• 10% discount on our clean and polish service for all floors previously sanded or fitted by FlooringFirst

Floorboards sanding and repairs in Hanger Lane

The solid pine floorboards running through Hanger Lane's interwar semis are typically thick, well-seasoned timber — the kind built to last, and in most cases still delivering on that promise. Boards that have spent years under carpet, or have developed gaps, surface staining or loose fixings, are almost always fully restorable without replacement. Our team starts every job by assessing and refitting any loose or squeaking boards before sanding begins, removing the underlying problem rather than just sanding over it. Where individual boards are beyond repair, we source reclaimed seasoned pine matched as closely as possible in width and grain to the existing floor. The complete floor is then sanded through progressive grits and finished with a durable lacquer or hardwax oil appropriate to how the room is used.

Parquet floor sanding in Hanger Lane

Many Hanger Lane's larger interwar semis — particularly those on the roads between Pitshanger Lane and Argyle Road — were originally fitted with herringbone parquet in hallways and front reception rooms. This flooring has often been under carpet for decades and its condition isn't always easy to judge until it's exposed, but in our experience the parquet in W5 properties tends to be structurally sound with repairs manageable in most cases. Our parquet floor sanding service covers the full process: cleaning off old adhesive residue, regluing or replacing lifted blocks, gap filling throughout with resin and sanding dust, and finishing with your choice of lacquer or hardwax oil. We strongly recommend gap filling for all parquet work — it stabilises the floor and produces a significantly cleaner result.

Engineered floor renovation in Hanger Lane

Hanger Lane's newer flats and recently refurbished properties increasingly have engineered wood floors that need refinishing rather than replacement. Because the sandable wear layer on engineered boards is typically only 3–4mm, our technicians always confirm wear layer depth and sanding history before any work begins — and give you an honest answer if the floor isn't a suitable candidate for refinishing. Where it is, we sand carefully and refinish with Bona, Loba or Osmo products, with both lacquer and hardwax oil options available.

Why choose our floor sanding services in Hanger Lane?

• Clear, itemised quotes — you always know exactly what the work costs before we start
• Free home surveys available six days a week, carried out in person by experienced surveyors
• Fully insured technicians — your property is covered throughout
• Floor Service Guarantee on all restoration and installation work
• Free aftercare advice on the right products to maintain your floor between restorations
• 22 years of experience working across Hanger Lane, Ealing and West London

Commercial floor sanding in Hanger Lane

We provide commercial floor sanding services in Hanger Lane and across the W5 postcode, working with:

• Offices and retail premises in W5
• Restaurants, cafés and pubs
• Schools and nurseries — including sport floor refinishing and line marking
• Community halls and public buildings

Whatever the size or type of project, contact us and we'll advise on the right solution.

Featured project — Parquet floor sanding and floorboards restoration in Hanger Lane, W5

This W5 project covered two different floor types in the same property — a situation we encounter regularly in the larger 1930s semis around Hanger Lane, where the original builders often used herringbone parquet in the hallway and reception room and pine floorboards throughout the upper floor.

The parquet in the hallway and front room had been under carpet since at least the 1980s. When lifted, the majority of the blocks were still firmly bonded, with a section near the front door showing some lifting — most likely the result of historic moisture from the doorstep. Those blocks were removed, the subfloor cleaned and re-levelled, and the blocks refitted and clamped while the adhesive cured. The rest of the parquet was in good condition and required only standard preparation before sanding.

The pine floorboards on the first floor were sound throughout — no replacements needed — but had significant gaps between boards consistent with natural drying over ninety years. We carried out full gap filling on both floors: resin and sanding dust on the parquet, and a combination of resin fill and pine slivers for the wider gaps between the floorboards upstairs. Pine slivers are a more appropriate solution for larger gaps as they flex naturally with the wood's seasonal movement rather than cracking over time.

Both floors were sanded through progressive grits and finished with Osmo Polyx hardwax oil in a satin sheen — the client's preference for a natural, low-maintenance finish that works well on both parquet and floorboards without creating a heavy lacquered appearance. The hardwax oil was applied in two coats with a 24-hour cure between each, and the floors were ready for full use 48 hours after completion.

Frequently asked questions

How much does floor sanding cost in Hanger Lane? Floor sanding in Hanger Lane (W5) typically ranges from £25 to £45 per square metre, depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are quoted separately. We provide fully itemised quotes with no hidden costs.

How long does floor sanding take in Hanger Lane? Most residential jobs in Hanger Lane take one to two days for a standard room. Multi-room projects, or jobs combining parquet and floorboards like the one above, typically take two to three days. We'll give you a realistic timeline at the free survey stage.

Do you offer free site visits in Hanger Lane? Yes — free, no-obligation site visits are available throughout Hanger Lane, Pitshanger and Perivale. Your surveyor will assess the floor in person and provide a written quote, usually within 24 hours.

What is the difference between gap filling with resin and using pine slivers? Both methods fill gaps between floorboards, but they suit different gap widths and floor conditions. Resin and sanding dust works best for narrower, consistent gaps — the mixture cures hard and matches the floor colour precisely. Pine slivers (thin strips of timber glued into the gap) are better for wider gaps, typically more than 5–6mm, as they flex naturally with the floor's seasonal movement without cracking. Our surveyor will recommend the right approach for your specific floor at the site visit.

Is hardwax oil or lacquer better for floors in a family home in Hanger Lane? Both are good options with different trade-offs. Lacquer (such as Bona Mega or Bona Traffic) is harder-wearing and requires less maintenance — ideal for high-traffic hallways and kitchens. Hardwax oil (such as Osmo Polyx) gives a more natural, matte appearance and is easier to touch up in small areas if the surface is damaged, but requires periodic re-oiling. For most Hanger Lane family homes we recommend lacquer for ground-floor hallways and hardwax oil for upper-floor bedrooms — but our surveyor will advise based on your specific floor and usage.

Floor Care Tips and Advice:

• Difference Between Softwood and Hardwood Flooring
• Benefits of Real Wood Flooring
• Hardwood vs. Laminate Flooring: Which Is Right for Your Home?
• Wood Floor Stain Application Explored
• Top Wood Flooring Options: Which One Is Right for You?
• Comparing Wood Floor Adhesives: Pros and Cons
• Unveiling the Secrets of Wood Floor Stains Care
• The Art of Test Staining for Stunning Floors
• Key Factors for Your Wood Floor Stain Decision
• Bamboo vs Laminate Flooring

Find Our More on Sanding in Hanger Lane

• Church Floor Sanding & Restoration
• Sports Floor Line Marking
• Floorboards Sanding & Restoration
• Choosing A Floor Sanding Company
• Wood Floor Colour Matching
• Wood Floor Sealing
• Light Floor Sanding
• Parquet Floor Sanding
• Sanding & Maintenance of Dinesen Solid Wood Flooring
• Engineered Wood Floor Sanding