Floor Sanding & Fitting Project Gallery

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Richmond, SW13. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Engineered - Sand, Buff & Lacquer
• Furniture Moving

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Wandsworth, SW15. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Hardwood - Sand, Buff & Lacquer
• Threshold - Sand & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This was one of our more comprehensive fitting jobs in Hendon, covering the full removal of old floorboards, the installation of new hardwood flooring, new skirting boards and beading throughout. The property had worn, tired boards that had become uneven in places, and the skirting had seen better days. The clients wanted a complete upgrade rather than a repair, and chose a quality solid hardwood board to complement the character of the house.

The Challenge

The main difficulty with this project was the state of the existing subfloor once the old boards were lifted. Several areas required levelling before the new hardwood could go down, and some of the fixing points for the skirting needed making good. Getting the subfloor right before fitting is essential -- if the base is not level, even the best hardwood boards will creak and flex over time. We also had to carefully measure and cut the skirting and beading around several doorframes and chimney breast alcoves, which required precise mitring on site.

Our Approach

• Strip out: Old floorboards were carefully removed and the subfloor was cleaned back and inspected.
• Subfloor preparation: Any high spots were planed down and low areas filled with a self-levelling compound, which was allowed to cure fully before fitting began.
• Hardwood installation: New hardwood boards were laid and secret-nailed along the length of each room, working from a straight baseline. Boards were staggered for strength and visual consistency.
• Skirting and beading: New skirting boards were fitted to all walls, cut and mitred at corners. Beading was run along the floor-to-skirting junction to give a clean finish and allow for natural board movement.
• Final finishing: The floor was given a light sand and a coat of protective oil to bring out the grain and protect the surface from day one.

The Result

The transformation was striking. What had been a tired and uneven floor became a well-fitted, fresh hardwood installation with clean skirting lines throughout. The clients said the rooms felt completely different -- brighter and much more in keeping with the age of the property. Hardwood floor fitting in London typically costs between £35 and £60 per square metre for supply and fit, depending on board species and room complexity. This project came in well within that range and delivered a finish the clients were very happy with.

Frequently Asked Questions

Do you remove the old flooring as part of the fitting service?
Yes. Strip-out of the existing floor is included in most of our fitting quotes. We also deal with responsible disposal of the old materials.

Does hardwood flooring work with underfloor heating?
Many hardwood species are compatible with underfloor heating systems, provided the boards are properly acclimatised and the floor temperature does not exceed the recommended maximum. We can advise on suitable species at the survey stage.

Do you fit skirting boards as a standalone service?
Yes, we can fit and finish skirting boards independently of a flooring project. Get in touch and we will arrange a visit to measure up and provide a quote.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

Our Stockwell clients requested a full restoration package for their engineered wood floor, covering sanding, buffing, lacquering and gap filling. They also asked us to move furniture before we started and return it once we had finished. The floor had seen heavy use over a number of years and had several visible gaps between boards, areas of worn lacquer, and a general dullness that no amount of cleaning could fix. The aim was to bring it back to a condition close to new without replacing the boards.

The Challenge

Combining gap filling with sanding and lacquering requires careful sequencing. Fill too early and the sanding process can pull filler out. Fill after sanding but before lacquering is the correct approach, but the filler must be fully dry before the lacquer goes on or the finish will bubble. Getting the colour match right on the gap filler is also important -- the wrong colour draws the eye and looks worse than no filler at all. The gaps on this floor were mostly in the middle of the room where movement had been greatest, and they varied in width, which required blending filler to get a close colour match to the board.

Our Approach

• Furniture clearance: We moved all furniture to one side of each room in stages to allow continuous working.
• Initial sanding: Drum sanding along the grain removed the old lacquer and flattened the surface, including slight ridges at a few board edges.
• Edge and detail work: Edge sanders and hand tools addressed the perimeter and any tight spots.
• Gap filling: We prepared a sawdust-and-resin filler matched to the board colour and worked it into the gaps, then allowed it to cure before continuing.
• Buffing: A fine-grit buff over the entire surface brought the wood to an even finish ready for lacquering.
• Lacquering: Two coats of water-based lacquer were applied with a light sand between coats to ensure good adhesion and a hard-wearing surface.
• Furniture return: Everything was put back in position and the rooms were handed back clean.

The Result

The floor came up exceptionally well. The gaps had disappeared and the lacquer gave the whole surface a clean, consistent sheen. The clients commented that the floor looked better than it had when they first moved in. For sanding, gap filling and relacquering a floor in this condition, costs generally sit between £25 and £45 per square metre, making it a very cost-effective alternative to replacement.

Frequently Asked Questions

Can gaps in engineered wood flooring be prevented?
Some seasonal movement and minor gapping is normal in wood floors as boards expand and contract with humidity changes. Keeping indoor humidity between 45% and 65% year-round reduces movement significantly. Wide or persistent gaps usually indicate a fitting or subfloor issue and are worth addressing properly.

What type of lacquer do you use?
We primarily use water-based lacquers, which have lower odour than solvent-based products, dry faster between coats and produce a hard-wearing finish. For clients who prefer an oil finish, we can offer Danish oil or hardwax oil alternatives.

Do you cover Stockwell and the surrounding area?
Yes. We work across south London including Stockwell, Brixton, Clapham and the wider SW postcode area. Contact us to arrange a free survey.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project in Wandsworth involved sanding, buffing, lacquering and gap filling a solid hardwood floor across multiple areas of a property. The building was a converted space with original hardwood laid many years ago, and the floor had accumulated a lot of surface damage over that time. It had not been professionally sanded in some years, and visible gaps had opened up between boards. Our team was brought in to carry out a full restoration, returning the floor to a strong, flat and well-finished surface.

The Challenge

The floor presented a few complications. There were areas of deeper scratching and some boards had cupped slightly due to past moisture exposure. Cupped boards need to be sanded down carefully so the high edges are brought level without over-sanding the centre of each board. The gaps were also quite pronounced in some sections, which required a substantial amount of gap filling and careful colour matching. Getting all of this right before lacquering was essential to a good end result.

Our Approach

• Inspection and prep: We walked the floor before starting, checking for raised nails, loose boards and any boards that had cupped or warped. Raised nails were punched down to prevent sander damage.
• Coarse sanding pass: A 40-grit pass with the drum sander levelled the cupped areas and removed the bulk of the old finish and surface damage.
• Medium and fine passes: Progressive grits brought the surface down to a consistent, smooth finish ready for gap filling.
• Gap filling: Filler was mixed to match the board colour and pressed into all significant gaps. Once cured, a final fine-grit pass over the filled areas created a flush surface.
• Buffing: A full buff of the floor prepared the grain for lacquer application.
• Lacquering: Two coats of protective lacquer were applied and allowed to cure between applications.

The Result

The finished floor was flat, clean and consistent throughout. The cupped boards were no longer visible and the gaps had been closed to a neat, matching finish. The lacquer brought out the natural grain of the hardwood and left the surface well protected for years ahead. Professional sanding and gap filling in London typically costs between £25 and £45 per square metre depending on floor condition, making this an excellent investment compared with full floor replacement.

Frequently Asked Questions

Can cupped floorboards be fixed without replacement?
In most cases, yes. If the cupping has been caused by a moisture event that has since resolved, the boards will often flatten naturally over time and sanding can correct any residual unevenness. If the moisture source is ongoing, that needs to be addressed first or the boards will cup again.

How long does a sanding job of this type take?
For a medium-sized residential floor, sanding, gap filling and lacquering typically takes two to three days. The floor needs to be clear of furniture and the property should be well ventilated throughout.

Do you work in commercial properties as well as residential?
Yes, we work in both. Commercial projects such as offices, shops and community halls are a regular part of our workload. We can arrange out-of-hours work where needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional installation of vinyl flooring at a property in Southfields, SW18. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.

Before the Work

Before installation, the existing floor covering was inspected and the subfloor was prepared to ensure it was flat, dry, and suitable for the new vinyl. Any existing floor covering was lifted and disposed of cleanly before the fitting work began.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Door Frame Trimming
• Doors Plus Frame Trimming (per door)
• Kitchen Plinths Trimming
• Vinyl Installation
• Door Only Trimming

The Result

The completed vinyl installation looked clean and finished throughout. Joins are tight, edges are neat, and the floor sits flat and stable. Beading and threshold strips were fitted where required to complete the job properly. The client was pleased with both the quality of the work and the appearance of the new floor.

Photos of the completed work:

Frequently Asked Questions

How long does vinyl installation in Southfields, SW18 take?
Most fitting jobs are completed within one to two days. Larger areas or more detailed layouts such as herringbone patterns take longer due to the additional cutting and positioning involved.

Do I need underlay?
Yes, underlay is required for most floor types and helps with insulation, sound deadening, and levelling minor subfloor imperfections. We can supply and fit appropriate underlay as part of the installation.

How much does floor fitting cost in Southfields, SW18?
Fitting costs typically range from £35 to £60 per square metre depending on floor type and complexity. We provide a full written quote before starting any work.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Golders Green, NW11. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Hardwood - Sand, Buff & Lacquer
• Staining
• Additional Gap Filling

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Golders Green, NW11 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Golders Green, NW11?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Golders Green, NW11?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Finsbury Park, N4. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Sand & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Finsbury Park, N4 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Finsbury Park, N4?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Finsbury Park, N4?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional installation of laminate flooring at a property in Chiswick, W4. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.

Before the Work

Prior to installation, the existing floor covering was inspected and the subfloor was prepared to ensure it was flat, dry, and suitable for the new laminate. Any existing floor covering was lifted and disposed of cleanly before the fitting work began.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Door Frame Trimming
• Furniture Moving
• Laminate Floor Installation
• Lift & Dispose Carpets or Laminates
• Skirting Board Removal
• Skirting Boards Installation (incl. materials)
• Thresholds & Fitting (excl. materials)
• Duralay Timbermate Excel Silver Wood Floor & Laminate Underlay

The Result

The completed laminate installation looked clean and finished throughout. Joins are tight, edges are neat, and the floor sits flat and stable. Beading and threshold strips were fitted where required to complete the job properly. The client was pleased with both the quality of the work and the appearance of the new floor.

Photos of the completed work:

Frequently Asked Questions

How long does laminate installation in Chiswick, W4 take?
Most fitting jobs are completed within one to two days. Larger areas or more detailed layouts such as herringbone patterns take longer due to the additional cutting and positioning involved.

Do I need underlay?
Yes, underlay is required for most floor types and helps with insulation, sound deadening, and levelling minor subfloor imperfections. We can supply and fit appropriate underlay as part of the installation.

How much does floor fitting cost in Chiswick, W4?
Fitting costs typically range from £35 to £60 per square metre depending on floor type and complexity. We provide a full written quote before starting any work.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This Golders Green project centred on a traditional herringbone parquet floor in need of full restoration. The parquet had been laid years earlier and had become heavily scratched, stained in places and stripped of its protective finish in high-traffic areas. The clients wanted the floor stained to a richer tone than the original and refinished to a hard gloss. Our team approached this as a precision job from start to finish, given the complexity of the herringbone pattern and the need to sand across multiple angles without leaving visible sanding marks.

The Challenge

Parquet floors present a specific challenge for sanding because the blocks run in multiple directions. Sanding along the grain of one set of blocks puts you across the grain of the adjacent set. This means working at a diagonal to the pattern is often necessary, followed by careful fine-grit passes and buffing to remove any cross-grain marks. Any sanding marks left on a parquet floor become very visible once stain is applied, so the preparation has to be thorough. The staining also required even application across the whole floor to avoid blotching, particularly where some blocks were more porous than others.

Our Approach

• Assessment: We checked every block for stability before sanding began. Any loose blocks were re-adhered and allowed to bond fully before the machine sanding started.
• Diagonal sanding: The first machine pass ran diagonally across the herringbone pattern to cut through the old finish and surface damage without tearing along one grain direction only.
• Along-pattern passes: Progressive finer grits were then used in the direction of the pattern to remove any diagonal marks from the first pass.
• Hand sanding: Border blocks and corners were sanded by hand to ensure consistency with the main field.
• Staining: A dark wood stain was applied evenly and worked into the grain with a cloth before being allowed to penetrate fully. A second coat was applied to areas that required greater depth of colour.
• Lacquering: Three coats of lacquer were applied to build a hard, high-gloss finish appropriate for a parquet of this quality.

The Result

The restored parquet looked exceptional. The rich stain brought out the geometry of the herringbone pattern and the three-coat lacquer produced a deep, reflective finish. The clients were delighted with how dramatically the room had changed without any structural work at all. Parquet sanding and refinishing in London typically runs between £70 and £100 per square metre given the additional labour involved in working with the pattern. It is, however, significantly cheaper than relaying a new parquet floor and produces outstanding results on a well-laid original.

Frequently Asked Questions

Can you change the colour of a parquet floor with staining?
Yes. Staining allows you to go darker than the natural wood tone. Going lighter requires bleaching, which is a more involved process. We can provide stain samples on a small test area before committing to the full floor.

How many coats of lacquer does a parquet floor need?
For a high-traffic residential area, we recommend at least three coats. The first seals the wood and stain, the second builds the protective layer, and the third gives the final surface hardness and sheen.

Is my parquet floor worth restoring if some blocks are loose?
Usually yes, provided the majority of the floor is sound. Loose blocks can be re-glued as part of the preparation stage. We only recommend replacement where a significant proportion of blocks are damaged beyond saving.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit