Floor Sanding & Fitting Project Gallery

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Balham, SW12. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Parquet - Sand, Buff & Oil

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Hackney, E5. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Floorboards - Refitting
• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Gap Filling - Pine Slivers
• Staining

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in South Norwood, SE25. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Thresholds & Fitting (inc. materials)
• Floorboards Replacement ( approx 10lm)
• Floorboards Lift& Refit
• Floor Repairs ( around fireplace heart)
• Door Trimming

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project in Hornchurch involved the installation of a chevron parquet floor — one of the more demanding jobs in the wood flooring trade. Chevron is a pointed-end pattern where each board cuts to a precise angle so that the rows meet in a continuous arrow or V-shape across the floor. Getting this right requires experience, careful subfloor preparation, and exact cutting and laying technique. Chevron and herringbone parquet fitting typically costs between £70 and £100 per square metre, reflecting the time and skill involved.

The Challenge

Chevron floor installation is considered one of the most complex jobs in the wood flooring industry. This pattern requires extra craftsmanship, experience, and knowledge compared to a standard plank or herringbone layout. The cut angle on each board must be exact and consistent, otherwise the pattern will not align cleanly as it progresses across the room. Our team of experienced professionals provides parquet floor installation services across London and the surrounding areas, and this Hornchurch project was completed to a high standard.

Our Approach

• Subfloor preparation: Before a single chevron board was laid, we made sure the subfloor was completely dry, level, and clean. This stage is non-negotiable for any parquet installation — a chevron pattern will show even small variations in flatness far more clearly than a straight plank floor. The subfloor was checked for moisture content, levelled where needed, and primed for adhesive.
• Layout planning: The starting point and central axis of the chevron pattern were carefully worked out relative to the room shape. The room in Hornchurch had an irregular shape, which added to the complexity of getting the layout to look balanced.
• Chevron floor fitting: Boards were adhered to the prepared subfloor starting from the datum line, working outward in both directions to keep the pattern expanding symmetrically. Each board was pressed into the adhesive and checked for alignment before moving to the next.
• Perimeter cuts: Cutting chevron boards to fit the room's edges requires precision — particularly at angles and around door frames — to keep the pattern readable right to the boundary of the floor.
• Flooring accessories: Once all boards were laid and the adhesive had cured, we fitted all the finishing accessories — thresholds, beading, and door trims — to complete the installation.

The Result

In order to ensure the durability of the parquet floor, we began with thorough subfloor preparation — confirming it was completely dry, levelled, and clean before installation. Once the subfloor was in the right condition, the chevron fitting began. Parquet floors are available in a wide range of patterns, and chevron is one of the most striking. We finished the installation by fitting all flooring accessories to give the floor a complete, polished appearance. The Hornchurch client now has a distinctive, high-quality floor that is well-fitted and properly finished.

Frequently Asked Questions

Q: What is the difference between chevron and herringbone parquet?
A: In a herringbone pattern, each rectangular board is laid at 90 degrees to the adjacent one, creating a zigzag effect with square-cut ends. In a chevron pattern, the ends of the boards are cut at a precise angle so that when two boards meet, they form a clean V or arrow point. Chevron has a sharper, more geometric look and is generally considered the more challenging pattern to lay correctly.

Q: Can chevron parquet be fitted in any room shape?
A: Yes, though irregular or non-rectangular rooms add complexity to the layout planning and the perimeter cuts. The key is establishing the correct datum line at the start. Our team assessed the room shape in Hornchurch before starting and planned the layout accordingly to make sure the pattern sat correctly within the space.

Q: Do chevron floors need to be sanded after installation?
A: This depends on the product. Pre-finished engineered chevron boards come with the factory finish already applied and do not require sanding after fitting. Unfinished boards need sanding and finishing on-site after installation. We advise on the right product and process during the quoting stage.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Muswell Hill, N10. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Doors Plus Frame Trimming (per door)
• Gap Filling
• Hardwood - Sand, Buff & Oil
• Hardwood Installation
• Skirting Board Removal
• Skirting Boards Installation (incl. materials)
• Stairs Step Fitting (Wooden Floors)
• Thresholds & Fitting (inc. materials)
• Subfloor Preparation ( Landing)
• Skirting Board Reinstall ( small room)

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Kilburn, NW6. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Door Frame Trimming
• Furniture Moving
• Hardwood Installation
• Kitchen Plinths Trimming
• Lift & Dispose Hardwood Flooring
• Subfloor Preparation (ply 9 mm)
• Thresholds & Fitting (inc. materials)
• Tradition Solid Oak Flooring, Lacquered, 150x18xRL mm

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional installation of engineered wood flooring at a property in Barnet, HA8. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.

Before the Work

Prior to installation, the existing floor covering was inspected and the subfloor was prepared to ensure it was flat, dry, and suitable for the new engineered wood. Any existing floor covering was lifted and disposed of cleanly before the fitting work began.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Doors Plus Frame Trimming (per door)
• Engineered Flooring Installation
• Lift & Dispose Carpets or Laminates
• Stairs Step Fitting (Wooden Floors)
• Thresholds & Fitting (inc. materials)
• Vinyl Installation
• Duralay Timbermate Excel Silver Wood Floor & Laminate Underlay
• QuickStep Comfort Underlay for Livyn Flooring, 1.15 mm, 15 sqm
• QuickStep Livyn Alpha Click Pure Oak Blush Vinyl Flooring
• Tradition Engineered Oak Flooring, Rustic, Brushed & Oiled, 190x20x2200mm
• Unfinished Solid Oak Stair Nosing, 80 x 20 mm, 0.9 m
• Lift & Dispose Lino

The Result

The completed engineered wood installation looked clean and finished throughout. Joins are tight, edges are neat, and the floor sits flat and stable. Beading and threshold strips were fitted where required to complete the job properly. The client was pleased with both the quality of the work and the appearance of the new floor.

Photos of the completed work:

Frequently Asked Questions

How long does engineered wood installation take?
Most fitting jobs are completed within one to two days. Larger areas or more detailed layouts such as herringbone patterns take longer due to the additional cutting and positioning involved.

Do I need underlay?
Yes, underlay is required for most floor types and helps with insulation, sound deadening, and levelling minor subfloor imperfections. We can supply and fit appropriate underlay as part of the installation.

How much does floor fitting cost in London?
Fitting costs typically range from £35 to £60 per square metre depending on floor type and complexity. We provide a full written quote before starting any work.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional installation of parquet flooring at a property in Bayswater, W2. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.

Before the Work

Prior to installation, the existing floor covering was inspected and the subfloor was prepared to ensure it was flat, dry, and suitable for the new parquet. Any existing floor covering was lifted and disposed of cleanly before the fitting work began.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Doors Plus Frame Trimming (per door)
• Lift & Dispose Carpets or Laminates
• Parquet Floor Fitting - No Border
• Skirting Board Removal
• Thresholds & Fitting (inc. materials)

The Result

The completed parquet installation looked clean and finished throughout. Joins are tight, edges are neat, and the floor sits flat and stable. Beading and threshold strips were fitted where required to complete the job properly. The client was pleased with both the quality of the work and the appearance of the new floor.

Photos of the completed work:

Frequently Asked Questions

How long does parquet installation take?
Most fitting jobs are completed within one to two days. Larger areas or more detailed layouts such as herringbone patterns take longer due to the additional cutting and positioning involved.

Do I need underlay?
Yes, underlay is required for most floor types and helps with insulation, sound deadening, and levelling minor subfloor imperfections. We can supply and fit appropriate underlay as part of the installation.

How much does floor fitting cost in London?
Fitting costs typically range from £70 to £100 per square metre depending on floor type and complexity. We provide a full written quote before starting any work.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Streatham, SW16. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Sand, Buff & Lacquer
• Staining
• Stairs - Sand & Seal
• Floorboards Refit

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Ealing, W5. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Fireplace Heart Removal
• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Staining
• 2 X Concrete Section Removal and Fitting Floarboards

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit