Floor Sanding & Fitting Project Gallery

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Wandsworth, SW15. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Hardwood - Sand, Buff & Lacquer
• Threshold - Sand & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

Our Stockwell clients requested a full restoration package for their engineered wood floor, covering sanding, buffing, lacquering and gap filling. They also asked us to move furniture before we started and return it once we had finished. The floor had seen heavy use over a number of years and had several visible gaps between boards, areas of worn lacquer, and a general dullness that no amount of cleaning could fix. The aim was to bring it back to a condition close to new without replacing the boards.

The Challenge

Combining gap filling with sanding and lacquering requires careful sequencing. Fill too early and the sanding process can pull filler out. Fill after sanding but before lacquering is the correct approach, but the filler must be fully dry before the lacquer goes on or the finish will bubble. Getting the colour match right on the gap filler is also important -- the wrong colour draws the eye and looks worse than no filler at all. The gaps on this floor were mostly in the middle of the room where movement had been greatest, and they varied in width, which required blending filler to get a close colour match to the board.

Our Approach

• Furniture clearance: We moved all furniture to one side of each room in stages to allow continuous working.
• Initial sanding: Drum sanding along the grain removed the old lacquer and flattened the surface, including slight ridges at a few board edges.
• Edge and detail work: Edge sanders and hand tools addressed the perimeter and any tight spots.
• Gap filling: We prepared a sawdust-and-resin filler matched to the board colour and worked it into the gaps, then allowed it to cure before continuing.
• Buffing: A fine-grit buff over the entire surface brought the wood to an even finish ready for lacquering.
• Lacquering: Two coats of water-based lacquer were applied with a light sand between coats to ensure good adhesion and a hard-wearing surface.
• Furniture return: Everything was put back in position and the rooms were handed back clean.

The Result

The floor came up exceptionally well. The gaps had disappeared and the lacquer gave the whole surface a clean, consistent sheen. The clients commented that the floor looked better than it had when they first moved in. For sanding, gap filling and relacquering a floor in this condition, costs generally sit between £25 and £45 per square metre, making it a very cost-effective alternative to replacement.

Frequently Asked Questions

Can gaps in engineered wood flooring be prevented?
Some seasonal movement and minor gapping is normal in wood floors as boards expand and contract with humidity changes. Keeping indoor humidity between 45% and 65% year-round reduces movement significantly. Wide or persistent gaps usually indicate a fitting or subfloor issue and are worth addressing properly.

What type of lacquer do you use?
We primarily use water-based lacquers, which have lower odour than solvent-based products, dry faster between coats and produce a hard-wearing finish. For clients who prefer an oil finish, we can offer Danish oil or hardwax oil alternatives.

Do you cover Stockwell and the surrounding area?
Yes. We work across south London including Stockwell, Brixton, Clapham and the wider SW postcode area. Contact us to arrange a free survey.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project in Wandsworth involved sanding, buffing, lacquering and gap filling a solid hardwood floor across multiple areas of a property. The building was a converted space with original hardwood laid many years ago, and the floor had accumulated a lot of surface damage over that time. It had not been professionally sanded in some years, and visible gaps had opened up between boards. Our team was brought in to carry out a full restoration, returning the floor to a strong, flat and well-finished surface.

The Challenge

The floor presented a few complications. There were areas of deeper scratching and some boards had cupped slightly due to past moisture exposure. Cupped boards need to be sanded down carefully so the high edges are brought level without over-sanding the centre of each board. The gaps were also quite pronounced in some sections, which required a substantial amount of gap filling and careful colour matching. Getting all of this right before lacquering was essential to a good end result.

Our Approach

• Inspection and prep: We walked the floor before starting, checking for raised nails, loose boards and any boards that had cupped or warped. Raised nails were punched down to prevent sander damage.
• Coarse sanding pass: A 40-grit pass with the drum sander levelled the cupped areas and removed the bulk of the old finish and surface damage.
• Medium and fine passes: Progressive grits brought the surface down to a consistent, smooth finish ready for gap filling.
• Gap filling: Filler was mixed to match the board colour and pressed into all significant gaps. Once cured, a final fine-grit pass over the filled areas created a flush surface.
• Buffing: A full buff of the floor prepared the grain for lacquer application.
• Lacquering: Two coats of protective lacquer were applied and allowed to cure between applications.

The Result

The finished floor was flat, clean and consistent throughout. The cupped boards were no longer visible and the gaps had been closed to a neat, matching finish. The lacquer brought out the natural grain of the hardwood and left the surface well protected for years ahead. Professional sanding and gap filling in London typically costs between £25 and £45 per square metre depending on floor condition, making this an excellent investment compared with full floor replacement.

Frequently Asked Questions

Can cupped floorboards be fixed without replacement?
In most cases, yes. If the cupping has been caused by a moisture event that has since resolved, the boards will often flatten naturally over time and sanding can correct any residual unevenness. If the moisture source is ongoing, that needs to be addressed first or the boards will cup again.

How long does a sanding job of this type take?
For a medium-sized residential floor, sanding, gap filling and lacquering typically takes two to three days. The floor needs to be clear of furniture and the property should be well ventilated throughout.

Do you work in commercial properties as well as residential?
Yes, we work in both. Commercial projects such as offices, shops and community halls are a regular part of our workload. We can arrange out-of-hours work where needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Golders Green, NW11. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Hardwood - Sand, Buff & Lacquer
• Staining
• Additional Gap Filling

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Golders Green, NW11 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Golders Green, NW11?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Golders Green, NW11?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Finsbury Park, N4. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Sand & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Finsbury Park, N4 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Finsbury Park, N4?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Finsbury Park, N4?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This Golders Green project centred on a traditional herringbone parquet floor in need of full restoration. The parquet had been laid years earlier and had become heavily scratched, stained in places and stripped of its protective finish in high-traffic areas. The clients wanted the floor stained to a richer tone than the original and refinished to a hard gloss. Our team approached this as a precision job from start to finish, given the complexity of the herringbone pattern and the need to sand across multiple angles without leaving visible sanding marks.

The Challenge

Parquet floors present a specific challenge for sanding because the blocks run in multiple directions. Sanding along the grain of one set of blocks puts you across the grain of the adjacent set. This means working at a diagonal to the pattern is often necessary, followed by careful fine-grit passes and buffing to remove any cross-grain marks. Any sanding marks left on a parquet floor become very visible once stain is applied, so the preparation has to be thorough. The staining also required even application across the whole floor to avoid blotching, particularly where some blocks were more porous than others.

Our Approach

• Assessment: We checked every block for stability before sanding began. Any loose blocks were re-adhered and allowed to bond fully before the machine sanding started.
• Diagonal sanding: The first machine pass ran diagonally across the herringbone pattern to cut through the old finish and surface damage without tearing along one grain direction only.
• Along-pattern passes: Progressive finer grits were then used in the direction of the pattern to remove any diagonal marks from the first pass.
• Hand sanding: Border blocks and corners were sanded by hand to ensure consistency with the main field.
• Staining: A dark wood stain was applied evenly and worked into the grain with a cloth before being allowed to penetrate fully. A second coat was applied to areas that required greater depth of colour.
• Lacquering: Three coats of lacquer were applied to build a hard, high-gloss finish appropriate for a parquet of this quality.

The Result

The restored parquet looked exceptional. The rich stain brought out the geometry of the herringbone pattern and the three-coat lacquer produced a deep, reflective finish. The clients were delighted with how dramatically the room had changed without any structural work at all. Parquet sanding and refinishing in London typically runs between £70 and £100 per square metre given the additional labour involved in working with the pattern. It is, however, significantly cheaper than relaying a new parquet floor and produces outstanding results on a well-laid original.

Frequently Asked Questions

Can you change the colour of a parquet floor with staining?
Yes. Staining allows you to go darker than the natural wood tone. Going lighter requires bleaching, which is a more involved process. We can provide stain samples on a small test area before committing to the full floor.

How many coats of lacquer does a parquet floor need?
For a high-traffic residential area, we recommend at least three coats. The first seals the wood and stain, the second builds the protective layer, and the third gives the final surface hardness and sheen.

Is my parquet floor worth restoring if some blocks are loose?
Usually yes, provided the majority of the floor is sound. Loose blocks can be re-glued as part of the preparation stage. We only recommend replacement where a significant proportion of blocks are damaged beyond saving.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Marylebone, W1W. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Furniture Moving
• Hardwood - Buff & Re-Oil
• C Charge
• Stairs - Buff & Re-Oil

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Marylebone, W1W take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Marylebone, W1W?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Marylebone, W1W?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Islington, EC1R. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Engineered - Buff & Re-Oil
• C Charge

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Islington, EC1R take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Islington, EC1R?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Islington, EC1R?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Brixton, SW2. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Gap Filling - Pine Slivers
• Lift & Dispose Carpets or Laminates
• Lift & Dispose Hardwood Flooring
• Staining
• Thresholds & Fitting (inc. materials)
• Area 2 Floorboards - Sand, Buff & Lacquer
• Skirting Boards Painting
• Fireplace Painting
• Step Strip

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Brixton, SW2 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Brixton, SW2?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Brixton, SW2?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Westminster, W1W. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• CIS Labour Cost
• CIS Materials Cost

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Westminster, W1W take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Westminster, W1W?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Westminster, W1W?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit