Floor Sanding & Fitting Project Gallery

Project Overview

This project in Tadworth involved restoring a hardwood floor to a clean, well-protected finish through sanding, gap filling, and a multi-coat lacquer application. Before any sanding started, we carried out a thorough structural assessment to confirm the floor was stable enough for the work ahead. Floor sanding and refinishing in this area typically runs between £25 and £45 per square metre, with the precise cost depending on floor size and the condition of the boards.

The Challenge

This Tadworth project was an exciting challenge — bringing a beautiful hardwood floor back to its former condition. We had to begin by making sure the floor was strong and stable enough to withstand the intensive sanding and lacquering processes ahead. Using our experience in woodworking and construction, we inspected every section of the existing surface carefully. We checked for boards that had become loose over time, identified any areas where the timber had cracked or split, and made sure there was nothing compromised that would affect the long-term result once the restoration was complete.

Our Approach

• Structural inspection and repairs: We worked through the floor methodically, securing any loose boards and addressing cracked or weakened sections before picking up a sander. This groundwork is what makes the difference between a result that lasts and one that fails prematurely.
• Gap filling: Gaps between boards were filled to create an even surface across the room before sanding commenced.
• Multi-pass sanding: Industrial-grade equipment was used throughout. We started with a coarser abrasive grade to level the surface and remove the old finish, then worked through progressively finer grades until the floor was smooth and even — no deep scratches, no gouges left behind.
• Lacquer application: Multiple coats of lacquer were applied to build a durable layer of protection. The lacquer enhances the natural colour and grain of the wood while defending against scuffs, fading, UV exposure, and general daily wear.

The Result

We then began the meticulous sanding process using industrial-grade equipment designed for hardwood floors. Several rounds of sanding with varying abrasive grades produced a smooth, even finish. The lacquer layers built up a durable protective coat that will stand up to regular use for many years. The entire process required patience and careful technique from the team to ensure quality results for the Tadworth client — and that is exactly what was delivered.

Frequently Asked Questions

Q: Why is a structural check important before sanding?
A: Sanding applies significant mechanical force to the floor surface. If boards are loose or the subfloor underneath is soft or damaged, sanding can make these problems worse rather than better. Fixing any structural issues before starting means the finished floor will be stable and the new finish will not crack or lift at weak points.

Q: How many coats of lacquer do you apply?
A: We typically apply three coats of lacquer — a sealer coat and two finish coats — with light sanding between each to promote adhesion. This builds a solid, hardwearing surface. Some specifications call for an additional coat in high-traffic areas.

Q: Can hardwood floors be restored in occupied homes?
A: Yes, though it is more practical if the room being worked on can be cleared and left empty during the process. Most of the inconvenience comes from drying time between coats rather than the sanding itself. We work around the client's schedule wherever possible.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Kingston, KT2. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Sand, Buff & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Tadworth, KT20. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Gap Filling
• Hardwood - Sand, Buff & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Tadworth, KT20. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Gap Filling
• Hardwood - Sand, Buff & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Hackney, N1. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Parquet - Sand, Buff & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Wood Green, N22. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Refitting
• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This Golders Green project involved a full parquet floor restoration — inspecting the condition of each block, addressing repairs and loose sections, sanding the entire surface back to bare wood, and applying a lacquer finish to protect and seal it. Parquet restoration costs typically sit between £30 and £45 per square metre, depending on the extent of repairs and the finish specified.

The Challenge

Parquet floor restoration is a process that requires care and attention to detail. The first step is a thorough inspection of the floor to assess the extent of any damage or deterioration. Once this is completed, the next stage is sanding the floor to even out the surface. This is a critical step — the quality of the sanding determines the quality of the final finish. Sanding a parquet floor requires patience and the right equipment, particularly around the edges and in the corners of the pattern where a drum sander cannot reach.

Our Approach

• Full floor inspection: Each section of the parquet was checked for loose, lifting, or damaged blocks. Areas where the adhesive had failed were identified, blocks were re-glued and clamped, and any blocks beyond repair were sourced and replaced.
• Surface preparation: Once all blocks were secure and any repairs had cured, the floor was ready for sanding. Sanding a parquet floor requires careful attention to the direction of the grain — different sections of a herringbone pattern run at angles to each other, so the sanding approach needs to account for this to avoid cross-grain scratching.
• Sanding: We worked through the floor with a drum sander for the main field and an edge sander for the borders, progressing through grades of abrasive to produce a clean, even surface.
• Lacquering: Multiple coats of lacquer were applied to protect the restored surface and bring out the natural character of the wood. Each coat was allowed to cure fully before the next was applied.

The Result

Finally, the lacquer was applied to protect the floor from future damage. The process of inspecting, repairing, sanding, and lacquering has restored this Golders Green parquet floor to a condition it has not been in for many years. A properly lacquered parquet floor is straightforward to maintain and will continue to look well for a long time with basic care. This type of restoration is exactly what makes parquet such a worthwhile flooring investment — it can be renewed rather than replaced.

Frequently Asked Questions

Q: Can old parquet floors be fully restored regardless of their age?
A: In most cases, yes — provided the blocks themselves are structurally sound and the overall pattern is largely intact. Parquet floors in London properties are often 50 to 80 years old and can still be brought back to excellent condition. The key variables are the thickness of the remaining wear layer and how many times the floor has previously been sanded.

Q: What causes parquet blocks to lift or come loose?
A: The most common cause is moisture, either from damp rising through the subfloor or from water spills that have not been cleaned up promptly. Adhesive failure over time is also a factor in older floors where the original bitumen-based adhesive has dried out. Re-gluing loose blocks is a standard part of any parquet restoration.

Q: Is lacquer or oil better for parquet?
A: Both work well, and the choice comes down to preference. Lacquer gives a harder surface that is more resistant to water and abrasion. Oil gives a more natural, open look and can be spot-repaired without re-sanding the whole floor. For high-traffic areas, lacquer is generally the more practical choice.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Walthamstow, E17. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Sand Stairs Only

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Hackney, N1. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• NEXT STAGE - COMPLETION

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Canonbury, N1. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Parquet - Buff & Re-Oil

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit