Floor Sanding & Fitting Project Gallery

Project Overview

This project in Brixton SW9 involved a full restoration of worn hardwood floorboards. The scope included sanding, buffing, staining, and a final lacquer coat. Floor sanding and restoration in London generally runs between £25 and £45 per square metre, with staining and additional coats priced on top depending on the specification.

The Challenge

We started by carefully assessing the condition of the existing floor in our clients' home in Brixton. The flooring had lost its lustre, exhibiting signs of wear and tear, including scratches, dullness, and uneven surfaces. Our team saw clear potential to bring the floor back and set about sanding the surface to remove these imperfections. State-of-the-art equipment was used throughout the sanding process to achieve a smooth, even result without taking off more material than necessary.

Our Approach

The restoration moved through several distinct stages:

• Initial sanding: Belt and edge sanders removed the old finish, scratches, and surface staining. This opened the grain of the wood and gave us a clean surface to work with.
• Buffing: After sanding, we used specialised buffing machinery to bring the surface to a high level of smoothness. Buffing removes the fine marks left by sanding and draws out the natural character of the wood.
• Staining: The clients in Brixton SW9 chose a stain colour that suited their interior. We applied it evenly across the full floor, allowing the wood to absorb the colour uniformly before moving to the finish coat.
• Lacquer application: Professional-grade lacquer was applied using the correct equipment and technique. Multiple coats were used to build up a durable layer of protection that will withstand daily foot traffic.

The Result

Buffing the floorboards created a high level of smoothness and brought out the natural beauty of the wood before staining. The staining process allowed our clients in Brixton SW9 to personalise their floors, choosing from a range of tones to suit their space. Finally, high-quality lacquer was carefully applied to create a durable, attractive finish. The floor now looks sharp and is well-protected against future wear, giving the room a completely different feel compared to the tired surface we started with.

Frequently Asked Questions

Q: Can you stain hardwood floors any colour?
A: Most hardwood species take stain well, and we carry a wide range of tones from pale natural shades through to dark walnut. Results can vary slightly depending on the species — oak, pine, and ash all absorb stain differently. We always do a test patch before committing to the full floor.

Q: How long after lacquering can the floor be walked on?
A: Light foot traffic is usually possible within 24 hours of the final coat. However, we recommend keeping the floor clear of furniture and rugs for at least five to seven days to allow the lacquer to fully harden.

Q: Is lacquer or oil better for a Brixton-style Victorian floor?
A: Both are suitable, but lacquer gives a harder, more protective surface and is easier to clean day-to-day. Hardwax oil gives a more natural, matt look and can be spot-repaired without re-sanding. The right choice depends on how the room is used and what finish the client prefers.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project in Rickmansworth brought an ageing parquet floor back into good condition through sanding, buffing, gap filling, lacquering, threshold fitting, and installation of replacement oak parquet blocks. Parquet sanding typically costs between £30 and £45 per square metre, with the final price reflecting the amount of repair work and the number of finish coats specified.

The Challenge

The project involved various tasks including sanding, buffing, lacquering, fitting thresholds, and material installations. The main focus was to bring the parquet flooring back to life and restore its natural character. Our team used the latest sanding equipment and techniques to remove blemishes, roughness, and scratches from the surface. Once the floor was smooth, it was buffed with care to ensure uniformity and to bring up its natural sheen before any finish was applied.

Our Approach

The job was broken down into clearly defined stages:

• Assessment and preparation: We inspected the full floor area to identify loose, damaged, or missing parquet blocks. Loose blocks were re-glued and any that could not be saved were replaced with matching oak parquet to maintain a consistent pattern.
• Sanding: Using professional drum and edge sanders, we worked through the floor in multiple passes — starting with a coarser grade to level the surface and remove the old finish, then progressing to finer grades for a clean, smooth result.
• Buffing: After sanding, buffing machines were used to finish the surface and prepare it for lacquering.
• Gap filling: Any gaps between parquet blocks were filled to produce a consistent surface before the lacquer was applied.
• Lacquering: Multiple coats of lacquer were applied with adequate drying time between coats to build a durable, protective finish.
• Thresholds: New threshold strips were fitted to complete the edges and transitions across the floor.

The Result

Our team fitted new thresholds and installed quality oak parquet flooring blocks to replace any sections that could not be restored. The sanding, buffing, and lacquering process transformed what was a worn and tired parquet floor into something that looks properly looked after. The Rickmansworth client now has an elegant, classic floor that will continue to perform well with straightforward maintenance.

Frequently Asked Questions

Q: How many times can a parquet floor be sanded?
A: Traditional solid parquet blocks are typically 10mm to 16mm thick. Depending on how much material is removed each time, a solid parquet floor can usually be sanded four to six times over its lifetime. This makes it an excellent long-term investment compared to thinner engineered options.

Q: What happens when parquet blocks are missing or damaged?
A: We source matching replacement blocks as closely as possible in terms of species, size, and grain. Once sanded across the whole floor, the colour difference between old and new blocks tends to even out considerably, particularly after staining or lacquering.

Q: How long does a parquet sanding job take?
A: A typical room of around 20 to 30 square metres generally takes two to three days, including sanding, filling, and applying lacquer coats with drying time in between. Larger areas or heavier repairs will add to this.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in West Ealing, W13. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Gap Filling
• Parquet - Sand, Buff & Lacquer
• Blocks Replacement/ Refitting

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Lambeth, SW9. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Staining
• Stairs - Sand & Seal
• Floorboards - Refitting ( approx 15 lm)
• Small Area for repair ( around radiator) in Bedroom

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Stoke Newington, N16. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Floorboards - Refitting
• Floorboards - Sand, Buff & Lacquer
• Gap Filling

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in North West London, NW2. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Gap Filling
• Parquet - Repairs (excl. materials)
• Parquet - Sand, Buff & Lacquer

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Rickmansworth, WD3. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Gap Filling
• Parquet - Sand, Buff & Lacquer
• Thresholds & Fitting (inc. materials)
• Oak Parquet Flooring Blocks, Prime, 70x20x230 mm
• Remove Concrete, Level Subfloor and Install Parquet - 2.5 sqm
• Parquer Refit

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Kensal Green, NW10. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Doors Plus Frame Trimming (per door)
• Gap Filling
• Lift & Dispose Carpets or Laminates
• Parquet - Sand, Buff & Lacquer
• Parquet Floor Fitting - With Border
• Stairs - Sand & Seal
• Thresholds & Fitting (inc. materials)
• Vinyl Installation
• Silicon Application around perimeter

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Westminster, W2. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Gap Filling
• Parquet - Repairs (excl. materials)
• Parquet - Repairs (inc. materials)
• Parquet - Sand, Buff & Lacquer
• Extra Repairs

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Cricklewood, NW2. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Damp Proofing - Liquid DPM
• Door Frame Trimming
• Doors Plus Frame Trimming (per door)
• Parquet Floor Fitting - With Border
• Thresholds & Fitting (inc. materials)
• Additional Lacquer Coat
• Light Sand, Gap Fill and Lacquer - 3 coats

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit