Floor Sanding Case Studies

Project Overview This project in Willesden was one of the most varied we have undertaken in a single residential property. The scope included engineered wood flooring installation in the main living areas, vinyl flooring in the kitchen and bathroom, hardwood floor sanding, buffing and lacquering in an existing bedroom floor, and gap filling and staining in the hallway. The clients were doing a fu...

Project Overview

This project in Willesden was one of the most varied we have undertaken in a single residential property. The scope included engineered wood flooring installation in the main living areas, vinyl flooring in the kitchen and bathroom, hardwood floor sanding, buffing and lacquering in an existing bedroom floor, and gap filling and staining in the hallway. The clients were doing a full refurbishment and wanted all flooring handled by a single contractor to keep coordination simple and the finished look consistent across the property.

The Challenge

Managing multiple flooring types simultaneously in a single property requires careful scheduling so that wet processes such as staining and lacquering do not hold up other areas or get contaminated by dust from sanding. We planned the sequence carefully: strip-out and subfloor preparation first across the whole property, then vinyl installation in the wet rooms, followed by engineered fitting in the living rooms, and finally sanding, staining and lacquering in the bedroom and hallway after all other work was complete. Keeping the dust from the sanding operation contained was also important given the fresh installations elsewhere.

Our Approach

• Sequencing: A detailed daily schedule was agreed before work began to ensure each trade area was ready before the relevant team moved in.
• Vinyl fitting: Kitchen and bathroom vinyl was cut and laid on prepared subfloors with full adhesive bonding to prevent movement in wet conditions.
• Engineered fitting: Living room engineered boards were laid floating over an acoustic underlay, with expansion gaps maintained throughout.
• Gap filling and sanding: The hallway hardwood received gap filling first, followed by machine sanding once the filler had cured.
• Staining: A warm mid-tone stain was applied to the hallway to tie it visually to the engineered boards in the adjacent rooms.
• Lacquering: All sanded areas received two coats of satin lacquer to complete the job.

The Result

The finished property had a consistent, well-thought-out flooring scheme throughout. The stained hallway bridged the gap between the new engineered boards in the reception rooms and the existing bedroom floor, making the whole ground floor feel connected. The vinyl in the wet rooms was practical and looked sharp. Having one contractor handle everything saved the clients a considerable amount of coordination time and produced a result that felt planned rather than piecemeal. Fitting costs typically run between £35 and £60 per square metre for engineered boards, with sanding and finishing at £25 to £45 per square metre for the restoration elements.

Frequently Asked Questions

Can you handle multiple flooring types in one project?
Yes. We regularly work on properties where different rooms require different flooring solutions. Managing the sequencing and transitions between floor types is something we plan carefully at the survey stage.

What are the benefits of vinyl flooring in kitchens and bathrooms?
Modern vinyl flooring is fully waterproof, easy to clean, warm underfoot and available in a wide range of designs including stone and wood looks. It can also be fitted over most existing subfloors without the height build-up of other options.

Do you work in Willesden and the NW10 area?
Yes. We cover Willesden, Harlesden, Cricklewood, Kilburn and the surrounding north-west London postcodes. Contact us to arrange a free survey.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This was a challenging and rewarding wood floor renovation project in Stoke Newington. The floor was a wide-board solid wood installation that had seen years of heavy use and had received no professional maintenance in a long time. Several boards were damaged, there were open gaps throughout, and the surface finish had worn down to bare wood in places. The clients wanted the floo...

Project Overview

This was a challenging and rewarding wood floor renovation project in Stoke Newington. The floor was a wide-board solid wood installation that had seen years of heavy use and had received no professional maintenance in a long time. Several boards were damaged, there were open gaps throughout, and the surface finish had worn down to bare wood in places. The clients wanted the floor repaired, refinished and stained darker to match a recently updated interior. Our team handled the complete job from board replacement to final staining and lacquering.

The Challenge

Wide-board floors are more demanding to work with than narrow-board floors. The boards move more with seasonal humidity changes, which means gaps are often wider, and the boards themselves are heavier and can be harder to remove and replace without disturbing adjacent boards. Sanding wide boards also requires more attention to keeping the machine flat and level across the width of each board to avoid dishing. Getting the stain to penetrate evenly across both old and new boards required careful surface preparation, particularly on the replacement boards which were newer and had a tighter grain.

Our Approach

• Board replacement: Damaged boards were lifted individually and replaced with matching wide-board timber. New boards were secured with both adhesive and nailing for long-term stability.
• Gap filling: All significant gaps throughout the floor were filled with a sawdust-and-resin compound mixed to match the board colour as closely as possible.
• Sanding: A progressive sanding sequence from coarse to fine grit levelled the repaired areas and prepared the full surface for staining. Extra care was taken on the wide boards to avoid any dishing across the board width.
• Grain preparation on new boards: New replacement boards were lightly abraded by hand before staining to open the grain and encourage even pigment uptake.
• Staining: The agreed dark stain was applied and worked into the grain evenly. A second coat was applied to areas that needed more depth of colour.
• Lacquering: Two coats of hardwearing lacquer completed the job, protecting the stain and producing a consistent surface finish.

The Result

The transformation was considerable. What had been a tired, worn and gapped floor became a striking dark-stained wide-board floor that suited the updated interior perfectly. The repaired sections were not visible under the stain, and the gap filling had closed the most obvious gaps while leaving a natural look. The clients were extremely pleased with the result and described it as one of the best decisions they had made during their renovation. Sanding and refinishing a floor in this condition costs between £25 and £45 per square metre, with board replacement and gap filling costed based on the extent of work needed.

Frequently Asked Questions

Are wide-board floors harder to sand than narrow-board floors?
They require a bit more care, particularly around keeping the sanding machine flat across the board width, but they are not dramatically harder to work with. The main additional consideration is that wide boards move more with humidity changes, so gap filling needs to account for some residual seasonal movement.

How dark can you stain a wood floor?
You can go from a very light honey tone through to an almost black finish depending on the stain and the number of coats applied. We always do a test patch on an inconspicuous area or offcut before committing to the full floor so the client can see exactly what the finished colour will look like.

Do you cover Stoke Newington and north-east London?
Yes. We work regularly in Stoke Newington, Hackney, Islington, Dalston and the wider N and E postcode areas. Contact us to arrange a free survey and quote.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This project involved the professional sanding and restoration of an existing wood floor at a property in Lewisham, SE13. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work. Before the Wor...

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Lewisham, SE13. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Stairs - Sand & Seal

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Lewisham, SE13 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Lewisham, SE13?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Lewisham, SE13?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This project involved the professional sanding and restoration of an existing wood floor at a property in Bromley, BR2. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work. Before the Work ...

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Bromley, BR2. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (excl. materials)
• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Gap Filling - Pine Slivers
• Lift & Dispose Carpets or Laminates
• Staining
• Stairs - Sand & Seal

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Bromley, BR2 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Bromley, BR2?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Bromley, BR2?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This project involved the professional sanding and restoration of an existing wood floor at a property in Kensington, W10. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work. Before the Wo...

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Kensington, W10. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Fireplace Heart Removal
• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Gap Filling - Pine Slivers
• Reclaimed Floorboards

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Kensington, W10 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Kensington, W10?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Kensington, W10?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This project involved the professional sanding and restoration of an existing wood floor at a property in Hackney, N4. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work. Before the Work ...

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Hackney, N4. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Gap Filling - Pine Slivers
• Skirting Boards Installation (incl. materials)
• Staining
• Stairs Step Fitting (Wooden Floors)

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Hackney, N4 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Hackney, N4?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Hackney, N4?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This project involved the professional sanding and restoration of an existing wood floor at a property in Hackney, E8. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work. Be...

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Hackney, E8. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Hardwood - Sand, Buff & Oil

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Hackney, E8 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Hackney, E8?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Hackney, E8?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This project involved the professional sanding and restoration of an existing wood floor at a property in Lambeth, SW2. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work. Before the Work ...

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Lambeth, SW2. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Floorboards - Replacement (incl. materials)
• Floorboards - Sand, Buff & Lacquer
• Gap Filling
• Lift & Refit Existing Floorboards
• Joists Repairs ( per sqm)

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Lambeth, SW2 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Lambeth, SW2?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Lambeth, SW2?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This project involved the professional sanding and restoration of an existing wood floor at a property in Willesden, NW10. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work. Before the Wo...

Project Overview

This project involved the professional sanding and restoration of an existing wood floor at a property in Willesden, NW10. The floor had seen years of daily wear and needed attention to restore its quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.

Before the Work

Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was conducted to determine the correct sanding depth, assess board condition, and select the most appropriate finish for the space.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Beading Installation (incl. materials)
• Doors Plus Frame Trimming (per door)
• Engineered Flooring Installation
• Gap Filling
• Hardwood - Sand, Buff & Lacquer
• Kitchen Plinths Trimming
• Lift & Dispose Carpets or Laminates
• Staining
• Vinyl Installation
• Delay Of Works
• Stairnosings

The Result

Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.

Photos of the completed work:

Frequently Asked Questions

How long does floor sanding in Willesden, NW10 take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.

Do I need to vacate the property during sanding in Willesden, NW10?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.

How much does floor sanding cost in Willesden, NW10?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit

Project Overview This project involved the professional installation of parquet flooring at a property in Balham, SW12. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard. Before the Work Prior to installation,...

Project Overview

This project involved the professional installation of parquet flooring at a property in Balham, SW12. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.

Before the Work

Prior to installation, the existing floor covering was inspected and the subfloor was prepared to ensure it was flat, dry, and suitable for the new parquet. Any existing floor covering was lifted and disposed of cleanly before the fitting work began.

Survey photos showing the floor condition before work:

Our Approach

The following services were carried out as part of this project:

• Doors Plus Frame Trimming (per door)
• Parquet Floor Fitting - With Border
• Skirting Boards Installation (excl. materials)
• Subfloor Preparation (ply 12 mm)
• Thresholds & Fitting (inc. materials)
• Solid Oak Corner Bead, Lacquered, 15 mm, 2.4 m
• DPM application

The Result

The completed parquet installation looked clean and finished throughout. Joins are tight, edges are neat, and the floor sits flat and stable. Beading and threshold strips were fitted where required to complete the job properly. The client was pleased with both the quality of the work and the appearance of the new floor.

Photos of the completed work:

Frequently Asked Questions

How long does parquet installation in Balham, SW12 take?
Most fitting jobs are completed within one to two days. Larger areas or more detailed layouts such as herringbone patterns take longer due to the additional cutting and positioning involved.

Do I need underlay?
Yes, underlay is required for most floor types and helps with insulation, sound deadening, and levelling minor subfloor imperfections. We can supply and fit appropriate underlay as part of the installation.

How much does floor fitting cost in Balham, SW12?
Fitting costs typically range from £70 to £100 per square metre depending on floor type and complexity. We provide a full written quote before starting any work.

Have a similar project? Call us on 020 88309782 or Book a Free Site Visit