Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Muswell Hill, N10. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing wor...
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Muswell Hill, N10. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
Before the Work
Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.
Survey photos showing the floor condition before work:
Our Approach
The following services were carried out as part of this project:
- Doors Plus Frame Trimming (per door)
- Gap Filling
- Hardwood - Sand, Buff & Oil
- Hardwood Installation
- Skirting Board Removal
- Skirting Boards Installation (incl. materials)
- Stairs Step Fitting (Wooden Floors)
- Thresholds & Fitting (inc. materials)
- Subfloor Preparation ( Landing)
- Skirting Board Reinstall ( small room)
The Result
Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.
Photos of the completed work:
Frequently Asked Questions
How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.
Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.
How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Kilburn, NW6. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
B...
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Kilburn, NW6. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
Before the Work
Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.
Survey photos showing the floor condition before work:
Our Approach
The following services were carried out as part of this project:
- Beading Installation (incl. materials)
- Door Frame Trimming
- Furniture Moving
- Hardwood Installation
- Kitchen Plinths Trimming
- Lift & Dispose Hardwood Flooring
- Subfloor Preparation (ply 9 mm)
- Thresholds & Fitting (inc. materials)
- Tradition Solid Oak Flooring, Lacquered, 150x18xRL mm
The Result
Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.
Photos of the completed work:
Frequently Asked Questions
How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.
Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.
How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project involved the professional installation of engineered wood flooring at a property in Barnet, HA8. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.
Before the Work
Prior to instal...
Project Overview
This project involved the professional installation of engineered wood flooring at a property in Barnet, HA8. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.
Before the Work
Prior to installation, the existing floor covering was inspected and the subfloor was prepared to ensure it was flat, dry, and suitable for the new engineered wood. Any existing floor covering was lifted and disposed of cleanly before the fitting work began.
Survey photos showing the floor condition before work:
Our Approach
The following services were carried out as part of this project:
- Beading Installation (incl. materials)
- Doors Plus Frame Trimming (per door)
- Engineered Flooring Installation
- Lift & Dispose Carpets or Laminates
- Stairs Step Fitting (Wooden Floors)
- Thresholds & Fitting (inc. materials)
- Vinyl Installation
- Duralay Timbermate Excel Silver Wood Floor & Laminate Underlay
- QuickStep Comfort Underlay for Livyn Flooring, 1.15 mm, 15 sqm
- QuickStep Livyn Alpha Click Pure Oak Blush Vinyl Flooring
- Tradition Engineered Oak Flooring, Rustic, Brushed & Oiled, 190x20x2200mm
- Unfinished Solid Oak Stair Nosing, 80 x 20 mm, 0.9 m
- Lift & Dispose Lino
The Result
The completed engineered wood installation looked clean and finished throughout. Joins are tight, edges are neat, and the floor sits flat and stable. Beading and threshold strips were fitted where required to complete the job properly. The client was pleased with both the quality of the work and the appearance of the new floor.
Photos of the completed work:
Frequently Asked Questions
How long does engineered wood installation take?
Most fitting jobs are completed within one to two days. Larger areas or more detailed layouts such as herringbone patterns take longer due to the additional cutting and positioning involved.
Do I need underlay?
Yes, underlay is required for most floor types and helps with insulation, sound deadening, and levelling minor subfloor imperfections. We can supply and fit appropriate underlay as part of the installation.
How much does floor fitting cost in London?
Fitting costs typically range from £35 to £60 per square metre depending on floor type and complexity. We provide a full written quote before starting any work.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project involved the professional installation of parquet flooring at a property in Bayswater, W2. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.
Before the Work
Prior to installation...
Project Overview
This project involved the professional installation of parquet flooring at a property in Bayswater, W2. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.
Before the Work
Prior to installation, the existing floor covering was inspected and the subfloor was prepared to ensure it was flat, dry, and suitable for the new parquet. Any existing floor covering was lifted and disposed of cleanly before the fitting work began.
Survey photos showing the floor condition before work:
Our Approach
The following services were carried out as part of this project:
- Doors Plus Frame Trimming (per door)
- Lift & Dispose Carpets or Laminates
- Parquet Floor Fitting - No Border
- Skirting Board Removal
- Thresholds & Fitting (inc. materials)
The Result
The completed parquet installation looked clean and finished throughout. Joins are tight, edges are neat, and the floor sits flat and stable. Beading and threshold strips were fitted where required to complete the job properly. The client was pleased with both the quality of the work and the appearance of the new floor.
Photos of the completed work:
Frequently Asked Questions
How long does parquet installation take?
Most fitting jobs are completed within one to two days. Larger areas or more detailed layouts such as herringbone patterns take longer due to the additional cutting and positioning involved.
Do I need underlay?
Yes, underlay is required for most floor types and helps with insulation, sound deadening, and levelling minor subfloor imperfections. We can supply and fit appropriate underlay as part of the installation.
How much does floor fitting cost in London?
Fitting costs typically range from £70 to £100 per square metre depending on floor type and complexity. We provide a full written quote before starting any work.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Streatham, SW16. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work....
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Streatham, SW16. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
Before the Work
Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.
Survey photos showing the floor condition before work:
Our Approach
The following services were carried out as part of this project:
- Floorboards - Sand, Buff & Lacquer
- Staining
- Stairs - Sand & Seal
- Floorboards Refit
The Result
Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.
Photos of the completed work:
Frequently Asked Questions
How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.
Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.
How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Ealing, W5. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
Bef...
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Ealing, W5. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
Before the Work
Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.
Survey photos showing the floor condition before work:
Our Approach
The following services were carried out as part of this project:
- Floorboards - Fireplace Heart Removal
- Floorboards - Replacement (incl. materials)
- Floorboards - Sand, Buff & Lacquer
- Gap Filling
- Staining
- 2 X Concrete Section Removal and Fitting Floarboards
The Result
Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.
Photos of the completed work:
Frequently Asked Questions
How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.
Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.
How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in South Woodford, E18. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing w...
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in South Woodford, E18. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
Before the Work
Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.
Survey photos showing the floor condition before work:
Our Approach
The following services were carried out as part of this project:
- Floorboards - Replacement (incl. materials)
- Floorboards - Sand, Buff & Lacquer
- Gap Filling
- Staining
The Result
Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.
Photos of the completed work:
Frequently Asked Questions
How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.
Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.
How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Islington, N1. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
...
Project Overview
This project involved the professional sanding and restoration of an existing wood floor at a property in Islington, N1. The floor had seen years of daily wear and was in need of attention to bring it back to a quality finish. Our team carried out a full assessment before starting work, checking for any boards that needed attention alongside the main sanding and finishing work.
Before the Work
Before work began, the floor showed typical signs of wear. Surface scratches, dull patches, and general finish deterioration were present. A thorough survey was carried out to plan the correct sanding depth, assess board condition, and choose the most appropriate finish for the space.
Our Approach
The following services were carried out as part of this project:
- Floorboards - Sand, Buff & Lacquer
The Result
Once the sanding and finishing process was complete, the floor was transformed. The wood grain was opened up and brought back to life, the surface was smooth and even, and the new finish provided lasting protection. The client was left with a floor that looked, and performed, as good as new.
Photos of the completed work:
Frequently Asked Questions
How long does floor sanding take?
Most residential sanding jobs are completed in one to two days, depending on floor size and condition. Lacquering or oiling adds further drying and curing time, which we factor into the job schedule.
Do I need to vacate the property during sanding?
Modern dustless sanding equipment keeps dust to a minimum, but we recommend keeping pets and young children clear of the area during the work. Most clients remain in their property throughout.
How much does floor sanding cost in London?
Prices typically range from £25 to £45 per square metre depending on floor condition, finish type, and any repair work required. Gap filling and board replacement are priced separately if needed.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project involved the professional installation of chevron parquet flooring at a property in Waterloo, SE1. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.
Before the Work
Prior to inst...
Project Overview
This project involved the professional installation of chevron parquet flooring at a property in Waterloo, SE1. The client required a quality floor that would stand up to daily use and complement their interior. Our fitting team assessed the subfloor condition, carried out any necessary preparation work, and fitted the new floor to a high standard.
Before the Work
Prior to installation, the existing floor covering was inspected and the subfloor was prepared to ensure it was flat, dry, and suitable for the new chevron parquet. Any existing floor covering was lifted and disposed of cleanly before the fitting work began.
Our Approach
The following services were carried out as part of this project:
- Beading Installation (incl. materials)
- Lift & Dispose Rubbish
- Doors Plus Frame Trimming & Thresholds & Fitting (inc. materials)
- Subfloor Preparation
- Parquet Floor Fitting - Chevron Pattern without Border
- Congestion Charge
The Result
The completed chevron parquet installation looked clean and finished throughout. Joins are tight, edges are neat, and the floor sits flat and stable. Beading and threshold strips were fitted where required to complete the job properly. The client was pleased with both the quality of the work and the appearance of the new floor.
Photos of the completed work:
Frequently Asked Questions
How long does chevron parquet installation take?
Most fitting jobs are completed within one to two days. Larger areas or more detailed layouts such as herringbone patterns take longer due to the additional cutting and positioning involved.
Do I need underlay?
Yes, underlay is required for most floor types and helps with insulation, sound deadening, and levelling minor subfloor imperfections. We can supply and fit appropriate underlay as part of the installation.
How much does floor fitting cost in London?
Fitting costs typically range from £70 to £100 per square metre depending on floor type and complexity. We provide a full written quote before starting any work.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more
Project Overview
This project in Buckhurst Hill involved the installation of engineered wood flooring with a quality underlay, using correct preparation and installation procedures throughout. Engineered flooring is one of the most popular choices for residential properties — it offers the look and feel of solid wood with better stability across humidity changes. Fitting typically costs between...
Project Overview
This project in Buckhurst Hill involved the installation of engineered wood flooring with a quality underlay, using correct preparation and installation procedures throughout. Engineered flooring is one of the most popular choices for residential properties — it offers the look and feel of solid wood with better stability across humidity changes. Fitting typically costs between £35 and £60 per square metre, depending on the floor size and the complexity of the job.
The Challenge
Engineered flooring installation is a process that should be carried out by a professional to achieve the best long-term results. Quality materials and correct installation procedures are both essential. One product used on this project was the Duralay Timbermate Excel Silver Wood Floor and Laminate Underlay, which has good acoustic and thermal properties and is suited to both residential and commercial settings. Selecting the right underlay is part of specifying the job correctly, not an afterthought.
Our Approach
- Subfloor preparation: We started by preparing the subfloor thoroughly — cleaning the surface, checking for level, and removing any debris or old fixings. The subfloor was checked for moisture content before any underlay or flooring was brought in. A dry, clean, level base is the foundation that everything else relies on.
- Underlay installation: The Duralay Timbermate Excel Silver underlay was fitted across the prepared subfloor. This product provides a barrier against moisture rising from below and adds thermal and acoustic benefits. It also takes out minor surface imperfections in the subfloor that could otherwise transmit through to the finished floor.
- Engineered flooring installation: Boards were laid following the manufacturer's instructions, with the correct expansion gaps maintained at walls and fixed obstacles. The installation sequence and starting point were planned before work began to ensure the layout balanced well within the room.
- Acclimation period: The flooring was allowed to acclimate to the room for 24 hours before installation commenced. This allows the boards to adjust to the ambient temperature and humidity, reducing movement after fitting.
- Trims and finishing: Beading, thresholds, and door trims were fitted to complete the job.
The Result
When installing engineered flooring, preparation of the subfloor is the single most important factor. Once the subfloor was clean, level, and within the correct moisture range, the underlay was installed to provide protection and cushioning. Following the manufacturer's instructions at each stage and allowing the floor to settle properly before furniture was moved in meant the Buckhurst Hill client ended up with a floor that will perform well for many years. Engineered wood is a sound long-term choice for most residential properties, and this installation was carried out to the standard that makes it last.
Frequently Asked Questions
Q: What is the difference between engineered wood and solid wood flooring?
A: Solid wood is cut from a single piece of timber throughout its full thickness. Engineered wood has a real wood wear layer on the surface bonded to multiple layers of ply or HDF below. This construction makes engineered wood more stable across changes in temperature and humidity, which is why it is often the preferred choice for properties with underfloor heating or concrete subfloors.
Q: Can engineered wood be fitted over underfloor heating?
A: Yes, most engineered wood products are compatible with underfloor heating. The key requirements are that the surface temperature does not exceed 27 degrees Celsius and that the heating system is run at low temperatures for a period before installation to condition the subfloor. We check compatibility with each specific product before fitting.
Q: How long should engineered wood acclimatise before fitting?
A: Manufacturers typically recommend 24 to 48 hours in the room where the floor will be installed. The boards should be left in their packaging or stacked loosely to allow air circulation. Installing without acclimatisation can lead to boards moving or gapping after fitting, particularly if the room temperature or humidity differs significantly from the storage conditions.
Have a similar project? Call us on 020 88309782 or Book a Free Site Visit
Show more