Before the Work
The property in Hendon, NW4 had existing carpets across the rooms being fitted. These were lifted and disposed of before work began. The subfloor was checked for stability and levelness, and door frames were measured for trimming to accommodate the new floor height. All scope, materials and finishing details were agreed with the client during the initial site visit.
Our Approach
The existing carpets and laminates were lifted and removed cleanly before fitting began. Door frames were undercut to allow the new boards to slide underneath for a clean finish at each doorway, and doors were trimmed to the correct clearance height. The laminate was then laid in a herringbone pattern across 19m² — a more time-intensive layout than straight laying, as each board requires precise angled cutting and positioning to keep the pattern consistent and square across the room. Beading was installed along the perimeter walls to cover expansion gaps, and thresholds were fitted at all room transitions and doorways to complete the job properly.
The Result
The finished herringbone laminate floor looks sharp and well-considered throughout. The pattern runs consistently without breaks or misalignment, edges are clean, and all transitions between rooms are neatly completed. Doors open and close correctly over the new floor height. All work was completed to specification and signed off by the client on the day. Typical costs for laminate installation in North West London range from £35 to £60 per square metre for supply and fitting, depending on pattern complexity, area size and the product selected.
Frequently Asked Questions
Is herringbone laminate a good choice for Hendon properties? It works well in the types of properties common across NW4 — whether you're updating a 1930s semi or a modern flat near Brent Cross. The pattern adds visual interest to larger open rooms and works particularly well in hallways and living areas. The main consideration is that herringbone takes longer to fit than straight laying due to the angled cuts involved, which is reflected in the labour cost.
Do door frames always need trimming when fitting laminate in NW4? Almost always, yes. Laminate boards plus underlay typically raise the floor height by 10 to 15mm. Without trimming the frames, you either lose the expansion gap or end up with a visible gap at the doorway. It is a standard part of a properly finished installation and something we include as part of the job.
How much does herringbone laminate installation cost in Hendon? For supply and fitting in the NW4 area, expect to pay between £35 and £60 per square metre depending on the product, pattern and any preparation work required. Herringbone layouts sit toward the higher end of that range due to the additional cutting and fitting time involved. We provide a full written quote after a free site visit with no obligation.
Do you work in Hendon and the surrounding NW4 area? Yes. We cover Hendon and the wider NW4 postcode regularly, including Brent Cross, Golders Green, Mill Hill and Cricklewood. Call us on 020 88309782 or book a free site visit to get a quote for your project.