Carl's 90 is a hardening oil, which contains less than 10% solvents and is intended for the surface treatment of untreated timber floors exposed to normal or heavy wear. Due to its application and quick drying time, the floor may be completed in one working day. As subsequent coats must be applied before the previous one has dried, we recommend Carl's 90 for areas up to 70 sq.m.

• Suitable for areas up to 70 sq.m.
• Enhances the natural beauty of the timber
• Dry solids 90%
• Easy to apply
• Dries quickly, ready in a day
• Practically no bleed back
• Excellent coverage rate
• Meets DIM EN 71/3 (for use on children's toys etc.)

NOTE: Carl's 90 must be applied using a solvent-resistant rubber applicator.

Carl's 90 is a hardening oil, which contains less than 10% solvents and is intended for the surface treatment of untreated timber floors exposed to normal or heavy wear. Due to its application and quick drying time, the floor may be completed in one working day. As subsequent coats must be applied before the previous one has dried, we recommend Carl's 90 for areas up to 70 sq.m.

• Suitable for areas up to 70 sq.m.
• Enhances the natural beauty of the timber
• Dry solids 90%
• Easy to apply
• Dries quickly, ready in a day
• Practically no bleed back
• Excellent coverage rate
• Meets DIM EN 71/3 (for use on children's toys etc.)

NOTE: Carl's 90 must be applied using a solvent-resistant rubber applicator.

Carl's 45 is also intended for the surface treatment of untreated timber floors, exposed to normal or heavy wear, but due to its longer open time, larger areas can be treated. With increased solvent content, the oil dries more slowly allowing the contractor more time to apply the oil.

• For treatment of large areas
• Easy to apply
• Dry solids 45%
• Minimal bleed back
• Meets RAL-UZ 38 for VOC and formaldehyde emissions

Carl's 45 is also intended for the surface treatment of untreated timber floors, exposed to normal or heavy wear, but due to its longer open time, larger areas can be treated. With increased solvent content, the oil dries more slowly allowing the contractor more time to apply the oil.

• For treatment of large areas
• Easy to apply
• Dry solids 45%
• Minimal bleed back
• Meets RAL-UZ 38 for VOC and formaldehyde emissions

A blend of natural waxes designed for the periodic maintenance and cleaning of hardwood and other types of wooden floors treated with either a UV or Carl's Hard Wax Oil. It may also be used to giove the surface a glossier appearance.

• Suitable for both residential and commercial locations
• Can be buffed if a higher gloss is required
• Spot repairs are possible
• Suitable for use on floors prefinished with UV oil

The Osmo Polyx-Oil Rapid is a professional, clear, fast drying, matt finish oil for all wooden floors (solid wood floors, laminated flooring, oriented strand-board etc.). Can be used on cork floors, terracotta and other unglazed tiles. It is also well suited for the treatment of furniture surfaces (i. e. table tops).

The Osmo Polyx-Oil Rapid surface is extremely tough and hard-wearing. It is water-repellent and dirt-resistant. The finish is resistant against wine, beer, cola, coffee, tea, fruit juices, milk and water etc.

Dirt can easily be removed without trace. Renovating, even partially, is easy. Just clean and re-treat worn areas: No sanding, no repair marks, no removal of previous Polyx-Oil finish.

The wear resistance of floors treated with Osmo Polyx-Oil even exceeds that of conventional parquet seals and varnishes.
Osmo Polyx-Oil Rapid is based on natural vegetable oils and waxes. It is micro-porous and does not crack, flake, peel or blister. Therefore it is an ideal treatment even in rooms with high humidity.

Osmo Polyx-Oil Rapid is very easy to apply: Only two thin coats no primer!). The short drying time allows both coats within one day. It is of a creamy consistence (thixotropic). The satin-matt sheen can be intensified by slight polishing. Grain and texture of the wood are accentuated.

A wooden floor which has been treated with Osmo Polyx-Oil will become more beautiful and valuable with age.
Product based on natural oil and wax
Osmo Polyx®-Oil Rapid is based on natural vegetable oils and waxes. Natural oils and waxes penetrate deeply into the wood, keeping it elastic and healthy, and preventing it from getting dry and brittle. The wood is allowed to breathe. Moisture can evaporate. Shrinking and swelling are reduced.
Health and environment
Osmo Polyx®-Oil Rapid does not contain biocides nor preservatives. It is safe for man, animal and plant when dry and complies with German DIN 53160 (fast to perspiration and saliva) and EURO-NORM EN 71 (suitable for children’s toys).

Osmo Wood Wax Finish Transperant, Ebony is one of the range of Osmo colour finishes, coming in a range of natural wood shades to match the most commonly used wood species, and two clears (normal and extra thin).

Osmo Wood Wax Finish is semi-transparent. The final ppearance of the finish will therefore be influenced by the natural colour of the wood. Best results are normally achieved with corresponding or slightly darker shades or clear.

Light shades should only be used for light new wood. (Trial application recommended). All shades are intermixable. When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.

• No. 1101 Clear Extra Thin (satin-matt - can also be dipped, highly penetrable)
• No. 3101 Clear Normal
• No. 3111 White Spruce
• No. 3123 Pine
• No. 3127 Savanna
• No. 3128 Beech
• No. 3136 Birch
• No. 3137 Cherry
• No. 3138 Mahogany
• No. 3143 Cognac
• No. 3151 Dove Grey
• No. 3156 Turkish Green
• No. 3161 Ebony
• No. 3164 Oak
• No. 3166 Walnut
• No. 3168 oak antique

The Osmo Polyx-Oil Rapid is a professional, clear, fast drying, satin finish oil for all wooden floors (solid wood floors, laminated flooring, oriented strand-board etc.). Can be used on cork floors, terracotta and other unglazed tiles. It is also well suited for the treatment of furniture surfaces (i.e. table tops).

The Osmo Polyx-Oil Rapid surface is extremely tough and hard-wearing. It is water-repellent and dirt-resistant. The finish is resistant against wine, beer, cola, coffee, tea, fruit juices, milk and water etc.

Dirt can easily be removed without trace. Renovating, even partially, is easy. Just clean and re-treat worn areas: No sanding, no repair marks, no removal of previous Polyx-Oil finish.

The wear resistance of floors treated with Osmo Polyx-Oil even exceeds that of conventional parquet seals and varnishes.
Osmo Polyx-Oil Rapid is based on natural vegetable oils and waxes. It is micro-porous and does not crack, flake, peel or blister. Therefore it is an ideal treatment even in rooms with high humidity.

Osmo Polyx®-Oil Rapid is very easy to apply: Only two thin coats no primer!). The short drying time allows both coats within one day. It is of a creamy consistence (thixotropic). The satin-matt sheen can be intensified by slight polishing. Grain and texture of the wood are accentuated.

A wooden floor which has been treated with Osmo Polyx-Oil will become more beautiful and valuable with age.

Product Based on Natural Oil and Wax
Osmo Polyx-Oil Rapid is based on natural vegetable oils and waxes. Natural oils and waxes penetrate deeply into the wood, keeping it elastic and healthy, and preventing it from getting dry and brittle. The wood is allowed to breathe. Moisture can evaporate. Shrinking and swelling are reduced.

Health and environment
Osmo Polyx-Oil Rapid does not contain biocides nor preservatives.

Osmo Wood Wax Finish Transperant, Cognac 3143 is one of the range of Osmo colour finishes, coming in a range of natural wood shades to match the most commonly used wood species, and two clears (normal and extra thin).

Osmo Wood Wax Finish is semi-transparent. The final appearance of the finish will therefore be influenced by the natural colour of the wood. Best results are normally achieved with corresponding or slightly darker shades or clear.

Light shades should only be used for light new wood. (Trial application recommended). All shades are intermixable. When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.

• No. 1101 Clear Extra Thin (satin-matt - can also be dipped, highly penetrable)
• No. 3101 Clear Normal
• No. 3111 White Spruce
• No. 3123 Pine
• No. 3127 Savanna
• No. 3128 Beech
• No. 3136 Birch
• No. 3137 Cherry
• No. 3138 Mahogany
• No. 3143 Cognac
• No. 3151 Dove Grey
• No. 3156 Turkish Green
• No. 3161 Ebony
• No. 3164 Oak
• No. 3166 Walnut
• No. 3168 oak antique

Osmo Wood Wax Finish Transperant, Walnut 3166 is one of the range of Osmo colour finishes, coming in a range of natural wood shades to match the most commonly used wood species, and two clears (normal and extra thin).

Osmo Wood Wax Finish is semi-transparent. The final ppearance of the finish will therefore be influenced by the natural colour of the wood. Best results are normally achieved with corresponding or slightly darker shades or clear.

Light shades should only be used for light new wood. (Trial application recommended). All shades are intermixable. When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.

• No. 1101 Clear Extra Thin (satin-matt - can also be dipped, highly penetrable)
• No. 3101 Clear Normal
• No. 3111 White Spruce
• No. 3123 Pine
• No. 3127 Savanna
• No. 3128 Beech
• No. 3136 Birch
• No. 3137 Cherry
• No. 3138 Mahogany
• No. 3143 Cognac
• No. 3151 Dove Grey
• No. 3156 Turkish Green
• No. 3161 Ebony
• No. 3164 Oak
• No. 3166 Walnut
• No. 3168 oak antique

Osmo Wood Wax Finish Transperant, Oak 3164 is one of the range of Osmo colour finishes, coming in a range of natural wood shades to match the most commonly used wood species, and two clears (normal and extra thin).

Osmo Wood Wax Finish is semi-transparent. The final ppearance of the finish will therefore be influenced by the natural colour of the wood. Best results are normally achieved with corresponding or slightly darker shades or clear.

Light shades should only be used for light new wood. (Trial application recommended). All shades are intermixable. When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.

• No. 1101 Clear Extra Thin (satin-matt - can also be dipped, highly penetrable)
• No. 3101 Clear Normal
• No. 3111 White Spruce
• No. 3123 Pine
• No. 3127 Savanna
• No. 3128 Beech
• No. 3136 Birch
• No. 3137 Cherry
• No. 3138 Mahogany
• No. 3143 Cognac
• No. 3151 Dove Grey
• No. 3156 Turkish Green
• No. 3161 Ebony
• No. 3164 Oak
• No. 3166 Walnut
• No. 3168 oak antique

Osmo Wood Wax Finish Transperant, Oak 3164 is one of the range of Osmo colour finishes, coming in a range of natural wood shades to match the most commonly used wood species, and two clears (normal and extra thin).

Osmo Wood Wax Finish is semi-transparent. The final ppearance of the finish will therefore be influenced by the natural colour of the wood. Best results are normally achieved with corresponding or slightly darker shades or clear.

Light shades should only be used for light new wood. (Trial application recommended). All shades are intermixable. When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.

• No. 1101 Clear Extra Thin (satin-matt - can also be dipped, highly penetrable)
• No. 3101 Clear Normal
• No. 3111 White Spruce
• No. 3123 Pine
• No. 3127 Savanna
• No. 3128 Beech
• No. 3136 Birch
• No. 3137 Cherry
• No. 3138 Mahogany
• No. 3143 Cognac
• No. 3151 Dove Grey
• No. 3156 Turkish Green
• No. 3161 Ebony
• No. 3164 Oak
• No. 3166 Walnut
• No. 3168 oak antique

Osmo Polyx-Oil Colour Hardwax-Oil Finish Walnut 3166 is one of the range of Osmo colour finishes, coming in a range of natural wood shades to match the most commonly used wood species, and two clears (normal and extra thin).

Osmo Wood Wax Finish is semi-transparent. The final ppearance of the finish will therefore be influenced by the natural colour of the wood. Best results are normally achieved with corresponding or slightly darker shades or clear.

Light shades should only be used for light new wood. (Trial application recommended). All shades are intermixable. When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.

• No. 1101 Clear Extra Thin (satin-matt - can also be dipped, highly penetrable)
• No. 3101 Clear Normal
• No. 3111 White Spruce
• No. 3123 Pine
• No. 3127 Savanna
• No. 3128 Beech
• No. 3136 Birch
• No. 3137 Cherry
• No. 3138 Mahogany
• No. 3143 Cognac
• No. 3151 Dove Grey
• No. 3156 Turkish Green
• No. 3161 Ebony
• No. 3164 Oak
• No. 3166 Walnut
• No. 3168 oak antique

Osmo Wood Wax Finish Transperant, Cognac 3143 is one of the range of Osmo colour finishes, coming in a range of natural wood shades to match the most commonly used wood species, and two clears (normal and extra thin).

Osmo Wood Wax Finish is semi-transparent. The final ppearance of the finish will therefore be influenced by the natural colour of the wood. Best results are normally achieved with corresponding or slightly darker shades or clear.

Light shades should only be used for light new wood. (Trial application recommended). All shades are intermixable. When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.

• No. 1101 Clear Extra Thin (satin-matt - can also be dipped, highly penetrable)
• No. 3101 Clear Normal
• No. 3111 White Spruce
• No. 3123 Pine
• No. 3127 Savanna
• No. 3128 Beech
• No. 3136 Birch
• No. 3137 Cherry
• No. 3138 Mahogany
• No. 3143 Cognac
• No. 3151 Dove Grey
• No. 3156 Turkish Green
• No. 3161 Ebony
• No. 3164 Oak
• No. 3166 Walnut
• No. 3168 oak antique

Osmo Wood Wax Finish Transperant, Ebony3161 is one of the range of Osmo colour finishes, coming in a range of natural wood shades to match the most commonly used wood species, and two clears (normal and extra thin).

Osmo Wood Wax Finish is semi-transparent. The final ppearance of the finish will therefore be influenced by the natural colour of the wood. Best results are normally achieved with corresponding or slightly darker shades or clear.

Light shades should only be used for light new wood. (Trial application recommended). All shades are intermixable. When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.

• No. 1101 Clear Extra Thin (satin-matt - can also be dipped, highly penetrable)
• No. 3101 Clear Normal
• No. 3111 White Spruce
• No. 3123 Pine
• No. 3127 Savanna
• No. 3128 Beech
• No. 3136 Birch
• No. 3137 Cherry
• No. 3138 Mahogany
• No. 3143 Cognac
• No. 3151 Dove Grey
• No. 3156 Turkish Green
• No. 3161 Ebony
• No. 3164 Oak
• No. 3166 Walnut
• No. 3168 oak antique