Bona Traffic is a two-component, polyurethane, waterborne varnish for the surface treatment of timber floors in commercial premises or whereever a high resistance to wear is required. It is also suitable for overcoating compatible factory pre-finished timber and cork floors.

Bona's Traffic provides a clear, natural appearance, giving almost invisible protection when the IP (Matt) version is used. However, unlike oil, it offers a simple level of maintenance.

Traffic is Bona's most hard-wearing lacquer. Available in IP (Matt) or Silkmatt versions. Where there is a risk of sidebonding, Bona Prime Classic is recommended for the initial coat on bare wood.

• VOC 2010 Compliant
• Designed for use in commercial areas
• Extremely high resistance to wear
• Superb scratch, scuff and chemical resistance
• Non-yellowing surface
• Meets DIN Norm 18032 and BS 7044:1990 for slip resistance
• Meets O Norm 2354 Category C (very heavy wear)

Recommended Treatment Schedules:

• On bare wood - 1xPrimer plus 2-3 Traffic or 3-4 Traffic
• Overcoating - 1-2 Traffic

NOTE: Traffic must be used with the Hardener. The Traffic/Hardener must be mixed by shaking it vogorously for one minute. If small quantities of product are to be mixed, the Traffic container must be shaken before decanting product from it. Once mixed, Traffic is viable for five hours.

Bona Mega (in Matt sheen) is a single component, waterbased, 100% polyurethane lacquer for the surface treatment of timber floors in commercial and domestic areas subject to heavy wear. As crosslinking is achieved using oxygen in the air, Bona Mega has the performance of a two-component finish without requiring a separate catalyst.

It has all the advantages of a waterbased system, but still gives a deep, rich colouration similar to a solvent based finish. Bona Mega is available in ExtraMatt, Matt, SilkMatt & Gloss sheens.

• VOC 2010 compliant
• Easy to use, only one component
• Oxygen crosslinked
• Deep, rich solvent based appearance
• High resistance to wear, scuff marks, chemicals and scratches
• Mega Gloss meets DIN Norm 18032 and BS 7044:1990 for slip resistance
• Bona Mega Silkmatt and BOna Mega Matt meets BS 7044:1990 for slip resistance
• All versions meet O Norm C 2354 Category C (very heavy wear)

Application:

• On bare wood - 1 Coat x Primer, followewd by 2-3 coats of Bona Mega varnish
• Overcoating previously varnished floors should be carried out with Crosslinker.

Bona Traffic is a two-component, polyurethane, waterborne varnish for the surface treatment of timber floors in commercial premises or whereever a high resistance to wear is required. It is also suitable for overcoating compatible factory pre-finished timber and cork floors.

Bona's Traffic provides a clear, natural appearance, giving almost invisible protection when the IP (Matt) version is used. However, unlike oil, it offers a simple level of maintenance.

Traffic is Bona's most hard-wearing lacquer. Available in IP (Matt) or Silkmatt versions. Where there is a risk of sidebonding, Bona Prime Classic is recommended for the initial coat on bare wood.

• VOC 2010 Compliant
• Designed for use in commercial areas
• Extremely high resistance to wear
• Superb scratch, scuff and chemical resistance
• Non-yellowing surface
• Meets DIN Norm 18032 and BS 7044:1990 for slip resistance
• Meets O Norm 2354 Category C (very heavy wear)

Recommended Treatment Schedules:

• On bare wood - 1 x Primer plus 2-3 Traffic or 3-4 Traffic
• Overcoating - 1-2 Traffic

NOTE: Traffic must be used with the Hardener. The Traffic/Hardener must be mixed by shaking it vogorously for one minute. If small quantities of product are to be mixed, the Traffic container must be shaken before decanting product from it. Once mixed, Traffic is viable for five hours.

Bona Resident is a one-component, waterborne, polyurethane waterborne varnish for the surface treatment of timber floors in homes and other areas subject to normal wear.

NOTE: Available on request

Bona Resident is a one-component, polyurethane waterborne varnish for the surface treatment of timber floors in homes and other areas subject to normal wear.

NOTE: Available on request

Coverage - 8-10 sq.m / L

Drying Time - 1-2 hrs

Bona Novia is a single component water-based finish for the treatment of floors in homes and other areas subjected to normal wear. Bona Novia requires no primer and produces an even warm colouration. Bona Novia can also be used as a primer, providing a warm colouration, prior to the application of other Bona topcoats. Bona Novia offers good and early resistance to scuff marks and is a quick drying, economical coating which is compatible with all other Bona primers and lacquers.

Coverage - 8-10 sq.m / L

Drying Time - 1-2 hrs

Bona Novia is a single component water-based finish for the treatment of floors in homes and other areas subjected to normal wear. Bona Novia requires no primer and produces an even warm colouration. Bona Novia can also be used as a primer, providing a warm colouration, prior to the application of other Bona topcoats. Bona Novia offers good and early resistance to scuff marks and is a quick drying, economical coating which is compatible with all other Bona primers and lacquers.

Coverage - 8-10 sq.m / L

Drying Time - 1-2 hrs

Bona Novia is a single component water-based finish for the treatment of floors in homes and other areas subjected to normal wear. Bona Novia requires no primer and produces an even warm colouration. Bona Novia can also be used as a primer, providing a warm colouration, prior to the application of other Bona topcoats. Bona Novia offers good and early resistance to scuff marks and is a quick drying, economical coating which is compatible with all other Bona primers and lacquers.

An additive designed for use with Bona Mega. It acts as an adhesion promoter for overcoating compatible pre-finished or previously coated floors. The addition is only required in the initial Mega coat. Additions should be made at the rate of 4% following the dilution of Crosslinker with an equal quantity of water, i.e. 2% Bona Crosslinker + 2% water (Pack size 100ml)

Bona Naturale is unique floor surface treatment suitable for use on wooden floors in homes. Achieves a totally natural looking, easy to maintain surface. Bona Naturale 1-Component is waterborne and contains less than 5% solvents.

• VOC 2010 Compliant
• No need to prime
• Two coats only - a true @one-day dream@
• Can be spot repaired
• High resistance to wear, scuff marks, scratches and household chemicals

NOTE: Bona Naturale 1-Component must be applied using a medium pile roller.

Sprtive Primer is a single component, waterborne primer for use on unfinished sports floors or those sanded back to bare timber. This should then be overcoated with Bona Sportive Finish. Sportive Primer is designed to cope with the flexing of sports floors and will also enhance the natural beauty of the wood.

Sportive Finish is a two-component, 100% polyurethane varnish designed for use on wooden sports floors in specialist and multi-purpose environments. The finish has a high resistance to wear and meets DIN 18032 for slip resistance. Available in Matt and Gloss versions.

Sportive Finish is a two-component, 100% polyurethane varnish designed for use on wooden sports floors in specialist and multi-purpose environments. The finish has a high resistance to wear and meets DIN 18032 for slip resistance. Available in Matt and Gloss versions.

400ml bottle, Hardener for Bona Sportive Finish sold separately, please note a bottle of hardener comes with every bottle of Bona Sportive Finish.

Sportive Paint is a single component PU/acrylate line marking paint, designed for use either beneath or between coats of Sportive Finish. The paint can also be used for decorative purposes.